| ITEM #2576 |
SX Large Accessory Plate |
This Deluxe Versionof the Accessory Plate with over 32 mounting holes to fit almost every telescope mounting plate currently in production. By sliding this adaptor plate into your standard Vixen Dovetail Mount, you can use many other telescopes and mounts side by side.
Specifications
* Standard Vixen Dovetail Mount.
* Supplied with longer mount lock bolt
* Supplied with 3 sets of screws with Allen Wrench
* Weight 3.4 lbs boxed 14 x 6 x 2 inches |
 |
Price:$219.00
 |
| ITEM #2577 |
SX-GP 1.9 KG/4.2 LB. Counter Weight
|
Specifications |
|
Price:$79.00
|
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris and Super Polaris Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 2 inches
|
|
| ITEM #2578 |
SX-GP 2.8 KG/6.2 LB Counter Weight |
Specifications |
|
|
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris, and Super Polaris Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 2.75 inches
|
Price:$99.00
|
|
| ITEM #2579 |
SX-GP 3.7 KG/8.1LB Counter Weight |
Specifications |
|
|
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris, and Super Polaris Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 3.5 inches
|
Price:$109.00
|
| ITEM #2661 |
SX Dovetail Tube Plate |
Slips into Vixen GP Series Mounts. Use to attach your telescope with Vixen Tube Rings or third party rings with 1/4-20 tpi threaded holes. Other devices such as a camera can also be attached. Interchangeable with the GP tube plate. Two 1/4"-20 tpi bolts included |
Price:$18.95
|
Specifications |
|
* Approximately 7.5" long, 1.7" wide.
* Weight 8 ounces and unboxed 7.5 x 1.7 x 1 inches
* Furthest holes are 6.3: apart and center holes are 1.4" apart
* All holes pas 1/4-20 bolts and are smooth
non-threaded
|
| ITEM #3564 |
Bright Field Illuminator |
| For GP Mounts. |
Price:$35.95
|
| |
|
| ITEM #37911 |
DD-3 Dual-Axis Controller |
This dual-axis controller/drive corrector is for use with two optional #3752 Vixen MT-1 motor drives. These are compatible with the current Vixen Great Polaris, Great Polaris D2, and Great Polaris Economy German Equatorial Mounts and on telescopes using these mounts. It is also compatible with the optional MT-1 on older Super Polaris and Super Polaris DX mounts and scopes.
When controlled by the DD3, the accuracy of the MT-1 motor drive is within +/0.005% of the sidereal rate. Powered by 8 user supplied D batteries, this will run for approximately 20 hours. An optional #3599 AC Adaptor is available as is an optional #3828 Manual Operation Clutch, recommended if manual turning on one or both axis is to be retained |
Price:$199.00
|
Specifications |
|
|
| |
* Provides 32X sidereal for general movement and 2X sidereal north, south, west and shutoff east for astrophotographic guiding.
* Weight 1 lb.without batteries
* Boxed 8.5 x 6.25 x 3 inches
|
| ITEM #37912 |
Dual Axis Motor Drive DD3 Set |
| |
Includes DD3 controller, two MT-1WT motors and a battery box.
Price:$429.00
|
| ITEM #3752 |
MT-1 RA DEC Motor |
Can be used as either a right ascension or declination motor. The motor is controlled and powered by an optional Vixen SD-1 single axis or DD-1 dual axis drive controller. One MT-1 motor is needed for the single axis righ ascension operation or two motors are required for dual-axis operation. When controlled by an SD-1 or DD-1, the accuracy of the MT-1 is withing +/-0.005% of the sidereal rate. The optional 3828 Manual Clutch, described below, is needed if manual operation of either axis is to be retained. |
Price:$179.00
|
Specifications |
|
|
|
| |
* Right Ascension or Declination Motor.
* Compatible with Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts
* Optional SD-1 (3739) or DD-1 (3740) controller required for proper use
|
| ITEM #3796 |
Weight Shift Camera Bracket |
Allows attachment of camera to the 20mm weight shaft found on Vixen GP and Sphinx mounts. Because the Cameras weight is now helping counterbalance the Optical Tube, users are greatly appreciative of the fact they do not have to add MORE counterweights. Some use this to balance their Optical Tubes with Heavier cameras. Very multi-purpose. |
Price:$89.95
|
| Specifications |
|
|
| |
* Fits all Standard Vixen 20mm Weight Shaft on GP and Sphinx Mounts
* Approx 6.5” long, 2” wide at widest
* Center Bolt ¼-20 thread
* Weight 8 OZ. and is unboxed 6.5 x 2 x 1.5 inches comes unboxed
|
| ITEM #3881 |
GP Mount Aluminum Case |
Designed to protect and transport your GP Series Mount, Counter Weights with Shaft and Drive Corrector all in one easy to carry hard case. With a durable aluminum outer shell, and locking latches this case is designed for rugged durability for your remotest of observations. |
Price:$459.00
|
| |
*Specifications
5 Unique padded compartments
* Locking latches with keys
*Weight 10 Lbs. boxed 18 X 17.5 x 4.5 inches
|
| ITEM #3909 |
Half Pillar GP Mount |
This Half Pillar provides a 9" extension between the counterweight shaft or longer tube refractor and the tripod legs. In several positions at lower latitudes with the counterweight shaft or just using a longer tube instrument at zenith, the tripod legs can interfere with the proper movement of the telescope. Many users with a longer optical instrument may enjoy the gain in the instrument's elevation from the ground to make viewing more comfortable when viewing objects high in the sky. |
Price:$249.00
|
Specifications |
|
* 9" extension from top of tripod
* Compatible with Great Polaris, and Super Polaris Mounts
* Fits into 2 5/16" diameter socket on top of tripod f 4 1/8" outside diameter
* Weight 3.4 lbs unboxed 11.5 x 5 x 4.75 inches * |
| ITEM #3912 |
Polar Axis Scope, 6x20 with Illuminator |
| |
Features penlight external illuminator and RA and Decl. graduation rings
|
Price:$249.00
|
| ITEM #5460 |
Triangle Accessory Tray |
This Triangle Accessory tray provides a convenient place to set many of the things and amateur astronomer may be using through the night, eyepiece, chart, red flashlight etc. While not only providing a temporary storage function, this tray also increases the overall stability of the tripod and decreasing any vibrations seen through the telescope. With holes spaced approx 9.5” apart this tray fits many other non standard mounts too. |
Price:$34.95
|
Specifications |
|
* Metal Triangular Tray
* Works GP, GP-D2, GP2, GP-DX, GP-E, Sphinx, Porta (must flip knob holder) and Custom-D mounts.
* Holes approx 9.5” from each other
|
