| ITEM #251867 |
SXG Half Pillar |
The Sphinx Half Pillar adds a little over 8” of height to the SX system increasing comfort in observing and allowing longer optical tubes to be used with the Sphinx mount. Weight 4lbs. SX Half Pillar Instructions
|
Price $249.00
 |
| ITEM #2529 |
Starbook Screen Brightness Reduction Film |
For use with Sphinx Starbook and SkyPod Starbook-S (trimming required on S version), allows user to decrease amount of light emitted from LCD screen. While new versions of both Starbooks have increased range of brightness and contrast dimming, we at Vixen realize that for those Ultra-Dark observing sites even the smallest amount of white light is too much. These dark sheets can be used one or two at a time to give the user the most flexibility and dark adaptation possible for maximum seeing.
|
Price $5.95
|
| ITEM #2536 |
SX Battery Box |
Designed to power your SX or Skypod mount using 8 D-Cell batteries, this convenient power supply comes with its own carry case. Great for use in the field when observing from a dark sky site, or when you want to eliminate any cords running from the telescope to a wall socket. Batteries not included.
|
Price $59.95
|
| ITEM #2571 |
SX Decl. Clamp Unit |
| |
Price $189.00
|
| ITEM #2573 |
SX Polar Axis Scope |
Designed to fit in the Sphinx Mount, this polar finder scope is one of the easiest and most accurate around. The built in illuminator to the Sphinx is used by the scope when attached. Can be used for an easy polar alignment, or you can use each ring of information to accurately align to the point of offsetting for your exact longitude. Makes getting a perfect polar alignment for astrophotography purposes much easier.
Specifications
* 6 x 20 Polar Finder ScopeDesigned for use with Vixen Sphinx Mount
* Reticule shows placement of Big Dipper Stars and position for Polaris through the year 2025
* Weight 9 OZ. and is boxed 6.25 x 3.5 x 3.5 |
|
| ITEM#2574 |
SX Counterweight Shaft |
| |
|
|
Price $159.00
|
| ITEM#2576 |
Accessory Plate DX |
This Deluxe Versionof the Accessory Plate with over 32 mounting holes to fit almost every telescope mounting plate currently in production. By sliding this adaptor plate into your standard Vixen GP Dovetail Mount, you can use many other telescopes and mounts side by side.
Specifications
* Standard Vixen GP Dovetail Mount.
* Supplied with longer mount lock bolt
* Supplied with 3 sets of screws with Allen Wrench
* Weight 3.4 lbs boxed 14 x 6 x 2 inches |
 |
|
Price $219.00
|
| ITEM #2577 |
SX-GP 1.9 KG/4.2 LB. Counter Weight
|
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 2 inches
|
|
|
|
|
|
|
|
Price $79.00
|
| ITEM #2578 |
SX-GP 2.8 KG/6.2 LB Counter Weight |
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 2.75 inches
|
Price $99.00
|
|
| ITEM #2579 |
SX-GP 3.7 KG/8.1LB Counter Weight |
Specifications |
|
|
* Machined Steel Counterweights
* Compatible with Sphinx, Great Polaris, Great Polaris 2, Great Polaris D2, Great Polaris Economy, Super Polaris and Super Polaris DX Mounts
* Bored with 20mm inner Diameter hole to fit 3/4" (19mm) shaft
* Comes unboxed 4 x 4.5 x 3.5 inches
|
Price $109.00
|
| ITEM #2661 |
SX Dovetail Tube Plate |
Slips into Vixen SX Series Mounts. Use to attach your telescope with Vixen Tube Rings or third party rings with 1/4-20 tpi threaded holes. Other devices such as a camera can also be attached. Interchangeable with the SX tube plate. Two 1/4"-20 tpi bolts included
Specifications* Approximately 7.5" long, 1.7" wide.
* Weight 8 ounces and unboxed 7.5 x 1.7 x 1 inches
* Furthest holes are 6.3: apart and center holes are 1.4" apart
* All holes pas 1/4-20 bolts and are smooth
non-threaded |
|
Price $18.95
|
| ITEM #2697 |
SX Aluminum Carry Case |
Aluminum case designed to securely carry the complete Sphinx SX mount, including Sphinx, Star Book, counterweights and battery case. Dimensions: 20" x 19" x 9".
|
Price $449.00
|
| ITEM #3599 |
AC Adaptor |
Power cord to run the Sky Sensor, DD-1 and SD-1 controllers and Vixen Motor Drives
* 110V AC to 12V DC 3 AMOP
* Center Pin Negative
|
Price $149.00
|
| ITEM #3796 |
Weight Shift Camera Bracket |
Allows attachment of camera to the 20mm weight shaft found on Vixen GP and Sphinx mounts. Because the Cameras weight is now helping counterbalance the Optical Tube, users are greatly appreciative of the fact they do not have to add MORE counterweights. Some use this to balance their Optical Tubes with Heavier cameras. Very multi-purpose.
Specifications
* Fits all Standard Vixen 20mm Weight Shaft on GP and Sphinx Mounts
* Approx 6.5” long, 2” wide at widest
* Center Bolt ¼-20 thread
* Weight 8 OZ. and is unboxed 6.5 x 2 x 1.5 inches comes unboxed |
|
Price $89.95
|
| ITEM #3810 |
Dovetail Plate Mounting Block |
| |
For mounting optical tubes; weight 7.76 oz
|
Price $89.95
|
| ITEM #5460 |
Triangle Accessory Tray |
| |
This Triangle Accessory tray provides a convenient place to set many of the things and amateur astronomer may be using through the night, eyepiece, chart, red flashlight etc. While not only providing a temporary storage function, this tray also increases the overall stability of the tripod and decreasing any vibrations seen through the telescope. With holes spaced approx 9.5” apart this tray fits many other non standard mounts too. |
Price $34.95
|
Specifications |
|
| |
* Metal Triangular Tray
* Works GP, GP-D2, GP2, GP-DX, GP-E, Sphinx, Porta (must flip knob holder) and Custom-D mounts.
* Holes approx 9.5” from each other
|
| ITEM #8644 |
Cigarette Lighter Plug Adapter |
| |
|
Price $29.95
|
| ITEM #25161 |
HAL130SXG ALUMINUM TRIPOD |
| |
The SX HAL130 tripod is a solid platform designed for the SX and GP2 mounts. The tripod height varies from 25” to 39” and weighs in at less than 11 lbs.
|
Price $249.00
|
| ITEM #25171 |
SX Metal Pillar Tripod |
| |
Height: 85cm
Weight: 29 lbs |
Price $999.00 |
| ITEM #26961 |
SX Tripod carry case |
| |
Fits all SX/GP/SP (20mm) weight shafts.
|
Price $99.00
|
