Item #39196 - Vixen Digital Camera Quick Bracket II
List Price: $130.00
Quantity in Stock:
(Out of Stock)
This bracket allows for a quick change between camera view and visual view, without removing the camera. Very handy for use with both telescopes and spotting scopes. Designed to pinch the barrel of a visual back of 1.4"-2.4" (36mm to 61mm) in diameter. Equipped with a quick release knob to swing the attached camera aside. Eyepieces with long eye relief are recommended to minimize vignetting.
Suitable for cameras with the following specifications:
1. The height from the camera's bottom to the center of the camera lens is between .55 and 1.97" (14mm to 50mm)
2. The distance from the camera's tripod socket to the camera's lens if between .51 and 3.35" (13mm to 85mm)
3. The 1/4" tripod socket is less than 2.09"(50mm) from the center of the camera's lens
Attachable Digital Cameras: 1/4"-20 screw hole is located on the bottom of the camera Weight is 10.5 oz or less. Any heavier load can cause the product to bend Height of the center of the lens from the bottom is between .6" and 2" The distance from the 1/4"-20 screw hole to the tip of the lens (at a full extension) is .7-2.8" (This applies when an NLV 20mm eyepiece is attached to the flip mirror) The width between the center of the lens and 1/4-20" screw hole (horizontally) is less than 2"(when used with a flip mirror or GLH20D eyepiece
Share your knowledge of this product.
Be the first to write a review »